Active Litigation
Defective Blender Lawsuit Facts
TorHoerman Law is investigating claims for the Defective Blender Lawsuit.
Active Litigation
TorHoerman Law is investigating claims for the Defective Blender Lawsuit.
Defective blender lawsuits involve allegations that certain blenders malfunctioned during ordinary use, exposing consumers to sharp blades, broken containers, hot liquids, electrical hazards, or other preventable dangers.
These claims may examine whether a blender’s blade assembly, pitcher, lid, locking mechanism, motor, or other safety features failed because of a design defect, manufacturing defect, or inadequate warnings.
Reported injuries include deep lacerations, burn injuries, eye injuries, fractures, electrical shock, and other harm requiring emergency medical treatment or surgery.
This page explains the types of blender defects that have led to product liability claims, the injuries associated with those failures, and when injured consumers may be able to pursue a defective blender lawsuit.
TorHoerman Law is investigating injury claims involving defective blenders and can review whether the facts support a product liability lawsuit against the manufacturer, retailer, distributor, seller, or other responsible parties.

Modern blenders are designed with safety features intended to keep rapidly spinning blades, hot contents, and electrical components safely contained during ordinary use.
When those features fail, consumers can suffer serious injuries from exposed blades, detached blade assemblies, shattered containers, leaking seals, lid failures, overheating motors, or other product malfunctions.
Recent defective blender lawsuits have focused on alleged safety hazards involving blade assemblies, containers, lids, and other components that reportedly failed during normal operation.
Depending on the product involved, consumers have reported deep lacerations, burn injuries, eye injuries, electrical shock, fractures, nerve damage, and other serious harm requiring emergency medical treatment or surgery.
Product liability claims involving defective blenders may examine whether a product contained a design defect, manufacturing defect, or inadequate warnings, as well as whether safer alternative designs could have reduced the risk of injury.
TorHoerman Law is reviewing claims involving defective blenders and other kitchen appliances that allegedly malfunctioned during ordinary use.
If you or a loved one suffered injuries after a blender broke, exploded, overheated, shattered, leaked, or exposed moving blades, you may have legal options.
Contact TorHoerman Law for a free consultation to learn whether the facts of your case support a product liability claim.
A Texas woman has sued SharkNinja Operating LLC, alleging that a Ninja Foodi Smoothie Blender burst open during use and sprayed hot contents onto her face and body.
The complaint, filed November 2 in the U.S. District Court for the Southern District of Texas, involves model SS101TGT. The plaintiff alleges that on November 18, 2024, she placed cooked onion, garlic and water into the blending cup while preparing food for her son’s class.
According to the lawsuit, the cup began making a hissing sound after the blending cycle ended before the blade assembly separated and released hot contents onto her face, chest and arms. She alleges that she suffered second-degree facial burns and permanent scarring.
The complaint claims that the blender can generate heat and pressure inside its sealed cup without an adequate pressure-relief system or warning indicator. The plaintiff alleges that SharkNinja knew or should have known about the risk and failed to adequately redesign the product or warn consumers.
SharkNinja’s instructions for the SS101 series warn users not to blend hot liquids because pressure buildup can create a risk of burns. The lawsuit disputes whether the product’s warnings and safety features were adequate to protect consumers from the alleged hazard.
The plaintiff brings claims for strict liability, negligence and breach of the implied warranty of merchantability and seeks damages for medical expenses, pain and suffering, disfigurement and other alleged losses.
A Massachusetts woman has sued NutriBullet, alleging a personal blender separated while she was removing the blade assembly and sprayed scalding liquid onto her face and body.
The lawsuit was filed on October 22 in Massachusetts Superior Court against NutriBullet LLC and Capital Brands Distribution LLC.
According to the complaint, the woman blended ingredients for about a minute in a NutriBullet NB-201B 900 watt blender on December 31, 2024, then removed the cup and blade assembly from the base.
When she tried to unscrew the blade assembly, the cup allegedly came apart, which she attributes to heat and pressure built up by blade friction.
She was taken by ambulance to a hospital and then referred to a burn unit, and she alleges burns to her face, eyelids, arm and wrist, with lasting scarring, disfigurement and ongoing pain.
The suit alleges the blender lacks pressure relief, venting, pressure indicators and automatic shutoffs, all of which it says are feasible safer designs, and that its warnings are printed in small type on the back of the base where they are hard to see during use.
It also claims the companies knew of overheating and cup rupture risks from consumer complaints dating to at least 2011, including a 2014 report of a cup that exploded and caused burns, yet kept selling the product without redesigning it, improving the warnings or recalling it.
The plaintiff brings claims for negligence, breach of the implied warranty of merchantability and violations of Massachusetts consumer protection law.
She seeks compensation for medical expenses, pain and suffering, and permanent scarring and disfigurement, along with up to triple damages and attorney’s fees.
A Pennsylvania woman has sued SharkNinja, alleging the blade assembly of her Ninja QB1000-series food processor detached from its base during normal use, causing severe lacerations.
She filed the complaint in the U.S. District Court for the District of Massachusetts on September 18.
She alleges the food processor’s blade assembly sits loosely on the drive gear rather than locking securely into place, creating a risk that it can fall out if the lid comes off while pouring.
She was using the appliance for its intended purpose in September 2024 when the blade assembly allegedly detached, causing injuries that led to medical expenses, lost wages, and lasting pain.
Her complaint points to a 2015 CPSC recall of roughly 1.1 million Ninja blenders over a similar loose stacked-blade design, after the company received 53 prior laceration reports, arguing SharkNinja has known about this type of risk for years without fixing it.
She brings claims including strict product liability, negligence, and breach of implied warranty, seeking compensatory and punitive damages.
A California woman has sued SharkNinja Operating LLC, alleging her NutriNinja Pro blender exploded during normal use, causing severe burns and eye trauma.
She filed the complaint September 18 in the U.S. District Court for the District of Massachusetts.
She was using her father’s blender to make chili oil, pressing the hot contents down into the base to start blending when she noticed a plastic bubble forming on the cup’s surface.
Before she could shut off the device, the bubble burst.
She alleges the burst blender sprayed scalding chili oil onto her face, neck, and chest, leaving her with swollen skin and blisters requiring medical treatment for partial thickness burns and eye trauma.
Her complaint alleges the blender cup is defectively designed and prone to breaking open during use, exposing users to both hot contents and the still-spinning blades inside.
She claims SharkNinja knew about the risk from prior complaints and reports but continued selling the product without adequately warning consumers or fixing the design.
The suit brings claims including strict liability, negligence, and breach of implied warranty, seeking compensation for her injuries, medical expenses, and emotional distress.
It adds to a series of similar claims against SharkNinja this year, including a Texas lawsuit alleging a blender blade assembly detached during use and caused severe lacerations, and another Nutri blender case alleging heat and pressure buildup caused a lid to explode off entirely.
A Georgia woman has sued NutriBullet, alleging her blender exploded as she opened the cup and sprayed hot food across her body, causing severe burns and, she claims, the loss of her pregnancy.
She filed the complaint on February 27, 2026 in the U.S. District Court for the Northern District of Georgia against NutriBullet LLC, Homeland Housewares LLC, Capital Brands LLC, Capital Brands Distribution LLC and NutriLiving LLC.
According to the complaint, the incident happened on March 11, 2024 at her home in Cartersville, Georgia, while she was preparing baby food in a NutriBullet NB-100 blender.
She alleges the blender violently and unexpectedly exploded, leaving severe and permanent burns to her face, neck, chest, hands and arms.
She was pregnant at the time and alleges the burns and trauma caused her to miscarry.
The suit claims the blender was defectively designed and unreasonably dangerous, and that the defendants knew of similar prior incidents but did not recall the product or adequately warn consumers.
She also alleges that a printed circuit board timer, which shuts off some NutriBullet models after one minute, was missing from her unit and would have prevented the incident.
She brings claims for strict liability, negligence and breach of warranty and seeks compensatory damages for her injuries, emotional distress, medical expenses and lost income, along with punitive damages.
A California woman has sued SharkNinja and Sam’s Club, alleging the lid on her blender could be opened while the contents were still hot and under pressure, causing them to erupt and burn her.
She filed the complaint on November 19, 2025 in Riverside County Superior Court, and the case was removed to the U.S. District Court for the Central District of California on February 11, 2026.
The defendants are SharkNinja Operating LLC and Sam’s West Inc., doing business as Sam’s Club.
The woman alleges that in November 2024, while blending chili, she removed the cup and lid attachment and the contents erupted outward.
She reports second degree burns to her hands, wrists and arms, along with facial splash exposure, and says she continues to suffer pain, anxiety, emotional distress and psychological trauma.
The complaint contends the design allows the lid to be opened while the contents remain pressurized, and it proposes safer alternatives including a locking mechanism, a pressure indicator or a seal that keeps the lid closed until pressure dissipates.
She brings claims for negligence, strict product liability based on design and manufacturing defects, and failure to warn, and seeks special and compensatory damages, including damages for emotional distress.
The allegations resemble the lid safety concerns raised in lawsuits over SharkNinja pressure cookers, which were recalled in May 2025 after 106 burn injury reports.
A Colorado man has sued SharkNinja, alleging the blade assembly of his Ninja Foodi blender detached during normal use and cut his fingers.
He filed the complaint on December 10, 2025 in the U.S. District Court for the District of Colorado, naming SharkNinja Operating LLC as the only defendant.
According to the complaint, the stacked blade assembly came loose on December 31, 2023 and the blades fell out of the pitcher as he poured.
He alleges serious and substantial lacerations to his fingers, along with medical expenses and long term effects on his quality of life.
The suit says the blender’s removable blade column is not locked to the drive gear, which allows the blades to fall out unexpectedly.
The complaint points to a 2015 Consumer Product Safety Commission recall of earlier Ninja BL660 series blenders, which reported at least 53 laceration injuries from loose blades, and alleges SharkNinja kept selling newer models, including the CO351B he bought, with similar unsecured blade assemblies even though safer designs existed.
He brings claims for strict product liability, negligence and breach of the implied warranty of merchantability, along with allegations that the company failed to adequately test the product and to warn consumers. He seeks damages and interest under Colorado law.
A Kansas woman has sued NutriBullet, alleging the cup of her blender separated from the blade assembly during ordinary use and sprayed scalding contents onto her.
She filed the complaint on November 6, 2025 in the U.S. District Court for the District of Kansas against Capital Brands LLC, Capital Brands Distribution LLC, NutriBullet LLC, NutriLiving LLC and Homeland Housewares LLC.
The complaint alleges that on November 8, 2023, while she was making chili salsa, the cup detached from the blade assembly and the hot contents hit her face, neck, chest and left arm, causing severe burns.
It contends the blender’s motor can generate enough heat and pressure to push the container off its base during normal use, and that the design lacks a pressure release valve, a thermal cutoff and adequate warnings.
The unit also allegedly failed before the end of its intended useful life.
She further alleges that the defendants knew of earlier burn reports involving NutriBullet and Magic Bullet products but kept selling them without design changes, recalls or sufficient warnings.
She brings claims for strict liability, negligence and breach of the implied warranty, and seeks punitive damages.
Defective blender lawsuits involve allegations that a blender contained a design defect, manufacturing defect, or inadequate warnings that allowed the appliance to malfunction during ordinary use and cause preventable injuries.
Rather than focusing on a single brand or model, these product liability claims examine whether a blender’s blades, pitcher, lid, locking mechanism, motor, seals, electrical components, or other safety features failed to perform as consumers reasonably expected.
Recent lawsuits involving defective blenders have raised allegations of detached blade assemblies, shattered containers, lid failures, pressure-related ejection of hot contents, overheating motors, electrical hazards, and other malfunctions capable of causing serious injuries.

The specific allegations vary depending on the manufacturer and product design, with some cases focusing on exposed blades that caused deep lacerations and others involving burn injuries, eye injuries, or injuries caused by broken containers or defective safety mechanisms.
A successful product liability claim generally requires evidence that the product was defective and that the defect substantially contributed to the consumer’s injuries.
Depending on the facts of the case, injured consumers can file individual personal injury lawsuits for defective product injuries and pursue financial compensation for medical expenses, lost wages, pain and suffering, permanent impairment, disfigurement, and other damages resulting from a defective blender.
Yes.
Several blender manufacturers have recalled products after reports of lacerations, burn injuries, fire hazards, overheating, or other safety concerns.
Most recalls involve specific models or components rather than every blender sold by a manufacturer, and each recall addresses a particular product defect or hazard.
The existence of a recall may support an investigation into a product-related injury, but the absence of a recall does not necessarily mean a blender was safe or prevent an injured consumer from pursuing a product liability claim if evidence shows the product was defective.
Recent blender recalls include:
Lawsuits have been filed involving blender-related injuries that were not necessarily associated with a recall.
For example, public reports describe a 2024 California lawsuit alleging that a blender exploded and caused serious injuries, and a separate May 2025 incident in which a woman reportedly suffered second-degree burns after a Ninja blender allegedly ejected hot contents.
Allegations in individual lawsuits do not establish liability, but they may raise questions about product design, warnings, or other safety issues that warrant further investigation.
Consumers who believe they were injured by a recalled or defective blender should preserve the product, identify the manufacturer and model number, and determine whether the blender was subject to a recall, safety notice, or prior injury reports.
A product liability lawyer can review the available evidence and evaluate whether the facts support a defective blender lawsuit.
Defective blender lawsuits may involve many different manufacturers, depending on the product involved, the alleged defect, and the injuries sustained.
While many lawsuits and injury reports have focused on SharkNinja products, other manufacturers have also issued recalls or faced claims involving blade assemblies, blending containers, overheating components, or other alleged safety hazards.
The following brands have been associated with product recalls, reported injuries, or product liability investigations involving blenders sold through major retailers and online marketplaces.

Blender products that may be reviewed in a defective product case include:
Not every blender manufactured by these companies has been recalled or named in a lawsuit.
A Ninja Blender lawsuit, for example, may involve different product designs, alleged defects, and injuries than a claim involving another manufacturer.
Product liability claims depend on the specific model, the alleged defect, the circumstances of the incident, and the available evidence, including the blender itself, model number, purchase records, photographs, and medical documentation.
Defective blender lawsuits often center on whether a product failed to perform safely during ordinary household use.
Although the specific allegations vary from one manufacturer or model to another, many claims involve similar mechanical or electrical failures that can expose consumers to sharp blades, hot contents, or other hazards.
Product liability investigations typically examine how the blender was designed, whether it was manufactured correctly, and whether adequate warnings or instructions were provided.
Investigators may also review prior consumer complaints, recall history, internal testing, engineering documents, and whether safer alternative designs were available.
Some defects may develop after repeated use, while others may be present when the blender leaves the factory. Identifying the type of defect is often an important step in determining how the incident occurred and whether the manufacturer or another party may be legally responsible.
The following are some of the most common defects alleged in blender recalls, injury reports, and product liability lawsuits.

Common blender defects may include:
Defective blenders may pose an injury risk when their blades, pitcher, lid, motor, seals, or safety mechanisms fail during normal use.
A blender contains sharp moving parts and may operate at high speeds.
If the blades are exposed, the pitcher separates, the lid fails, or hot contents eject from the container, consumers may suffer severe injuries within seconds.

Potential injury risks may involve:
These risks can cause severe lacerations, puncture wounds, burns, eye injuries, and other harm.
A blender injury may be especially serious when the user’s hand, wrist, arm, face, or body comes into direct contact with sharp blades or scalding hot contents.
Reported defective blender injuries include laceration injuries, severe cuts, burns, and injuries requiring medical attention.
Blender injuries have included allegations that sharp blades detached, fell from the pitcher, or contacted consumers during normal use, cleaning, or handling.
Other cases have involved claims that a blender exploded or ejected hot liquid because of pressure buildup, a defective pitcher, or a failed blade assembly.

Common injuries may include:
Some victims may need emergency care, stitches, surgery, wound cleaning, hand therapy, scar treatment, or long-term follow-up care.
Severe injuries can affect a person’s ability to work, drive, cook, care for a loved one, or perform daily tasks.
A defective blender can allegedly cause injuries when a component fails to keep blades or hot contents safely contained.
In defective blender lawsuits, many claims focus on the stacked blade assembly and whether it can fall out of the pitcher during pouring, washing, or handling.
When blades fall unexpectedly, the consumer may suffer severe cuts before they have time to react.
Other injury mechanisms may involve:
A blender caused injury case may depend on what happened before, during, and after the incident.
Attorneys may review the product design, prior complaints, warning labels, recall history, model numbers, and whether the manufacturer left known safety risks unchanged.
Blender defects can cause different types of injuries depending on the failure.
Blade-related defects are often linked to laceration risk, while pressure buildup, leaking, overheating, or container failure may cause burn injuries.
A defective pitcher, loose lid, or failed seal can allow contents to escape and injure the user.
Defects linked to blender injuries may include:
These product defects may lead to severe lacerations, burn injuries, property damage, and other harm.
Product liability claims may allege that manufacturers knew or should have known about the risk and failed to provide safer designs, stronger warnings, or adequate instructions.
Product liability lawsuits have been filed over a variety of alleged blender defects that reportedly caused consumers to suffer serious lacerations, burn injuries, eye injuries, and other harm during ordinary use.
Depending on the product involved, lawsuits have alleged that blade assemblies detached unexpectedly, blending containers shattered or separated, lids failed to remain secured, or hot contents were ejected from the appliance during operation.
Other claims have involved allegations of defective safety mechanisms, inadequate warnings, electrical hazards, overheating components, or product designs that exposed users to foreseeable injury.
Manufacturers named in blender injury lawsuits or product recalls include companies that produce countertop blenders, portable blenders, and combination food preparation systems.

Each case is evaluated on its own facts, including the specific product model, the alleged defect, the circumstances of the incident, and the injuries sustained.
Product liability lawsuits are allegations, not findings of liability.
An injured consumer generally must prove that a design defect, manufacturing defect, inadequate warning, or another legally recognized product defect substantially contributed to the injury.
A product liability lawyer can investigate the appliance, review medical records, examine prior recalls or consumer complaints, and determine whether the available evidence supports a defective blender lawsuit.
You may be able to file a defective blender lawsuit if you suffered injuries after a blender malfunctioned during ordinary use.
Product liability claims are evaluated based on the specific product involved, the nature of the alleged defect, the injuries sustained, and the available evidence.
You do not need to know exactly why the blender failed before speaking with a product liability attorney, but preserving the product and related evidence can be important.

You may have a potential claim if:
Not every blender-related injury results from a product defect, and not every malfunction gives rise to a lawsuit.
A product liability law firm can evaluate the facts of your case, determine whether a defect may have contributed to the incident, and explain whether you may be able to pursue compensation for your injuries.
Evidence is important in any defective blender lawsuit.
The blender itself may help show whether the blades, pitcher, lid, gasket, or safety system failed.
Do not throw away, clean, repair, alter, or return the blender before speaking with an attorney if you were injured.

Helpful evidence may include:
This evidence may help show whether the blender was defective and whether the company should be held accountable for injuries caused by the product.
A defective blender lawsuit may seek financial compensation for the physical, emotional, and economic harm caused by the injury.
The value of a claim depends on the injury severity, medical treatment, long-term impact, available evidence, and applicable state law.

Potential damages may include:
Severe injuries may require ongoing care and may affect a person’s ability to work or use their hand normally.
A product liability lawsuit may help injured consumers seek compensation from the manufacturer, retailer, or other responsible parties.
If you were injured by a defective blender, get medical attention immediately.
Severe cuts, puncture wounds, burns, and eye injuries can worsen without treatment.
Prompt care also creates medical records that may help connect the injury to the blender incident.

After getting medical attention, take these steps if possible:
These steps can help protect your health, preserve evidence, and support a potential blender lawsuit.
TorHoerman Law is investigating injury claims involving defective blenders, Ninja blenders, and other defective products.
Our product liability lawyers help injured consumers determine whether a manufacturer, retailer, distributor, or seller may be responsible for injuries caused by unsafe kitchen appliances.
A blender injury case may require investigation into product design, warnings, prior complaints, recalls, model numbers, blade assembly defects, pitcher defects, and available medical evidence.

TorHoerman Law has the resources needed to investigate claims against big corporations and begin building cases for injured consumers.
If you or a loved one suffered severe lacerations, burn injuries, surgical repair, physical pain, mental anguish, or other serious injuries after using a defective blender, you may have legal options.
Contact TorHoerman Law today for a free consultation, or use the chatbot on this page for a free case evaluation.
A defective blender lawsuit is a product liability claim filed by someone who suffered injuries after a blender malfunctioned during ordinary use.
These cases may involve allegations that the blender’s blade assembly, pitcher, lid, gasket, motor base, or safety mechanisms failed to protect consumers from sharp blades, hot contents, broken parts, or other hazards.
A lawsuit may seek compensation for medical expenses, physical pain, mental anguish, lost wages, and other losses caused by a defective blender.
Defective blenders can cause severe cuts, laceration injuries, puncture wounds, burns, eye injuries, scarring, nerve damage, and other serious injuries.
Some victims may need emergency medical attention, stitches, wound care, hand therapy, or surgery depending on how the injury occurred.
In more serious cases, an injured person may need to undergo surgical repair if blades, broken parts, or hot contents cause deep tissue damage.
Several blender manufacturers have been associated with product liability lawsuits, consumer injury claims, or major product recalls involving alleged safety defects.
The nature of the reported issues varies by manufacturer and may involve detached blade assemblies, shattered containers, overheating components, fire hazards, or hot liquids escaping during operation.
A lawsuit or recall does not mean that every blender produced by a manufacturer is defective, and each claim depends on the specific model, the alleged defect, and the available evidence.
Blender brands that have been associated with product liability lawsuits or major recalls include:
You should keep the blender, blade assembly, pitcher, lid, gasket, motor base, packaging, manual, warning labels, proof of purchase, and photos of the product after the injury occurred.
Do not clean, repair, return, or throw away the blender before speaking with an attorney because the product itself may be key evidence.
If the manufacturer left a known safety risk unchanged, preserved product evidence may help show whether the company should be held accountable.
If you were injured by a Ninja blender, you may be able to pursue a product liability lawsuit if evidence shows that a defect contributed to your injuries.
Reported Ninja blender injuries have involved allegations of detached blade assemblies, exposed blades, defective pitchers, and other product failures, although each case depends on the specific facts and product involved.
Claims involving defective Ninja blenders, a SharkNinja blender, a Ninja Nutri Blender Pro, or models featuring FreshVac technology or Auto IQ functions are evaluated individually based on the alleged defect, the injuries sustained, and the available evidence.
A product liability lawyer can review the blender model, medical records, and other documentation to determine whether your case may support a claim for compensation.

Tor Hoerman has represented injured individuals for more than 30 years, with experience spanning individual personal injury cases and nationwide mass tort litigation. His work includes car accidents, catastrophic injuries, product liability claims, and other serious injury cases. Tor has served in court-appointed leadership roles in national litigation and tried cases involving major corporate defendants.
TorHoerman Law’s legal content is researched and written by our editorial team and attorneys for legal accuracy, clarity, and relevance. We rely on statutes, court records, government publications, medical research, and other authoritative sources when applicable. This page provides general legal information and does not constitute legal advice.
TorHoerman Law reviews its legal content for factual accuracy, current information, and relevant legal context before publication and as material developments occur. This article is provided for general informational purposes and does not constitute legal advice. For guidance about a specific case, contact TorHoerman Law.
You can learn more about this topic by visiting any of our Defective Blender Lawsuit pages listed below:
A serious injury can change your life.

TorHoerman Law represents people whose lives have been disrupted by serious injuries, unsafe products, and negligence. Our attorneys handle individual personal injury cases as well as national mass tort lawsuits involving major corporations.
Founded in 2009, our legal team brings more than 100 years of combined experience handling serious injury and complex civil litigation.
Do you believe you’re entitled to compensation?
Use our Instant Case Evaluator to find out in as little as 60 seconds!

In this case, we obtained a verdict of $495 Million for our client’s child who was diagnosed with Necrotizing Enterocolitis after consuming baby formula manufactured by Abbott Laboratories.

In this case, we were able to successfully recover $20 Million for our client after they suffered a Toxic Tort Injury due to chemical exposure.

In this case, we were able to successfully recover $103.8 Million for our client after they suffered a COX-2 Inhibitors Injury.

In this case, we were able to successfully recover $4 Million for our client after they suffered a Traumatic Brain Injury while at daycare.

In this case, we were able to successfully recover $2.8 Million for our client after they suffered an injury due to a Defective Heart Device.
A serious injury can change your life.